CASE STUDY
Denso P2 System™ Protection for Hereford Water Pipeline
Buried Coatings
Project Data
| Location | Hereford, UK |
| Contractor | Lewis Civil Engineering |
| Client | Dŵr Cymru Welsh Water |
| Products | Denso P2 System™ |
| Date | October 2018 |
Project Details
Lewis Civil Engineering constructed an 8km length water main pipeline in Hereford for Dŵr Cymru Welsh Water.
Winn & Coales (Denso) Ltd were contacted for information on the most suitable corrosion prevention system along with application training of Lewis Engineers for the pipeline’s Viking Johnson joints.
The selected Denso system meets the P2 Civil Engineering Specifications for Water Industry and consists of Denso Primer D™, Denso Profiling Mastic™ and 150mm width Densoclad 70™ Tape. Denso Profiling Mastic is a vital part of the system, it is applied to seal the voids, bolts and heads around the joints to avoid moisture entrapment. The Densoclad Tapes consist of a thick polymer-bitumen adhesive, giving superior adhesion and flexibility, laminated to a tough plasticised PVC backing.
It was expected that Lewis Civil Engineering would install more than six hundred 700mm by 600mm joints and nearly two hundred 700mm diameter Viking Johnson joints. In addition to this there are six 450mm diameter spigot & socket joint pipes. All pipe lengths and joints were supplied in new condition, so no blasting pre-treatment was required.
The Denso materials were supplied via Burdens Civil Group, Merthyr Tydfil.
The Winn & Coales (Denso) Ltd Area Manager trained Lewis Civil Engineering staff to achieve the best application of the Denso P2 System™
