SeaShield 70/80™ System
Uses
- Jetties, Piers, Docks, and Wharfs
- Port Infrastructure
- Marine Structures
- New Construction and Maintenance
- Bridges
- Complex Shapes and Profiles
- Subsea and Shoreline Pipelines
![Completed SeaShield 70/80 System on the National Transmission System (NTA) pipeline](https://www.denso.net/wp-content/uploads/2023/02/SS70-80_3.png)
![SeaShield 70/80 System, Denso Glass Outerwrap applied over Bitumen Tape](https://www.denso.net/wp-content/uploads/2023/02/SeaShield-70-80-GOW.jpg)
![Section of partially submerged outfall pipeline protected with SeaShield 70/80 System](https://www.denso.net/wp-content/uploads/2023/02/SS70-80_1.png)
![Complete heavy duty SeaShield 70/8 System applied to an on shore outfall pipe](https://www.denso.net/wp-content/uploads/2023/02/SeaShield-70-80-Southend.jpg)
The SeaShield 70/80™ System combines the strengths of the SeaShield 70™ System and SeaShield 80™ System components to create an adaptable system for the effective protection of submerged or shoreline pipelines and complex marine structures, including beach outfalls/intakes and pipeline landfall.
The combined system comes in three variations depending on the level of protection required: A, B, or C.
- Economically protect structures in place, system can be applied underwater or to wet surfaces
- Greatly reduce corrosion, deterioration, and erosion
- Resistant to impact and abrasion
- Excellent stability under UV weathering conditions
- Accommodates piles of various shapes.
- Easy to install, no mixing, minimal wastage, with minimal requirements for specialist tools
- Low-maintenance following repair
- Low environmental impact
- Suitable for use over a wide range of ambient temperatures.
- Suitable for use in the immersed, tidal and splash zones, in marine, estuarine, lentic and riverine environments.
- VOC free
-
SeaShield 70/80 [Pipelines]
application instructions -
SeaShield 70/80 [Nodes]
application instructions
-
SeaShield 70/80 System
literature