Steelcoat 100/400™ Combination System
The combined Steelcoat 100/400™ System is now widely specified for difficult applications because it brings all of the strengths of both Steelcoat™ systems together so well. The combined system comes in two variations A and B.
Denso Steelcoat 100/400(A) System:
For badly pitted and rusted pipework and structural steelwork. For pipework, Steelcoat 100/400(A) System comprises Denso Hi-Tack™ Primer followed by a double wrap (55% overlap) of Denso Hi-Tack™ Tape. The outer Denso Ultraseal RT™ Tape is applied with a 25% overlap before painting. For steelwork, the Steelcoat 100/400(A) System is applied as above but with a single layer only (25% overlap) followed by Denso Ultraseal RT Tape with a 25% overlap before painting. Once applied the fabric backed Denso Ultraseal RT Tape is overpainted with two coats of Denso Acrylic Topcoat™.
Denso Steelcoat 100/400(B) System:
For damp/sweating pipework surfaces. As above ‘For pipework’ with Denso Paste S105™ replacing the Denso Hi-Tack Primer.
- Cold-applied
- Surface tolerant
- Minimum surface preparation needed – hand tool cleaning only
- Highly conformable
- Ideal for badly pitted and rusted steelwork
- Ideal for damp or humid steelwork
- If applied in the recommended way it will have a 30 year expected service life
-
Denso Steelcoat 100 / 400 System IFU
application instructions -
Denso Steelcoat 100 /400 System IFU - High Temperature
application instructions
-
WCD Steelcoat 100 400 System
literature -
WCD Steelcoat Pipebridge Protection
literature -
WCD Steelcoat Systems
literature
